Honda's 75HP EFI engines are perfect for pontoons, aluminum fishing boats and bay boats. The new Blast™ system will surprise you with a quick take-off that gets the hull up on plane quickly. Proven Honda engineering delivers power to spare, but with 20% less fuel, thanks to our exclusive lean burn technology. This engine is also a champ when it comes to battery charging capability. Honda's exclusive neodymium magnet flywheel alternator cranks out a whopping 35 amps!

4-Stroke SOHC 4 Cylinders
1496 cc (91.4 cubic inches)
Bore & Stroke
73 x 89.4 mm
Full Throttle RPM Range
5000-6000 RPM
HP Rating @ Propshaft
75HP @ 5500 RPM
Induction Scavenging
Valves per Cylinder
Fuel Delivery
Ignition System
Microcomputer Programmed
Starting System
Wet Sump
Cooling System
Water Cooled
44 Amps (35 Amps Battery Charging)
Trim Range
-4° to +16°
Tilt Range
Gear Ratio
2.33:1 (12 / 28)
Gear Shift
Recommended Transom Height
(L) 508 mm/20 inches
(X) 635 mm/25 inches
Dry Weight Tiller
(L) 163 kg - 359 lbs.
Dry Weight(RC)
(X) 166 kg - 365 lbs.


An all new 75hp!
The technology we applied to our newest outboard engine is the very same that powers one of the most popular cars in the world, the Honda Fit. A 4-cylinder, 1496cc(91.4ci) engine, weighing in at only 163kg (359 lbs.). It's the lightest in its class.
Programmed Fuel Injection
Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.
Lean Burn Control
Lean Burn Control increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on 20% less fuel* than others in its class. *Based on EPA Fuel Mode Consumption.
BLAST™ System
A quick movement of the throttle control activates the BLAST™ system, advancing the ignition curve aggressively. "Hole Shot" is vastly improved as more horsepower gets the hull up on plane quicker.
High Performance Gearcase
Designed to get you going faster, this all new gearcase reduces drag, eliminates hull porpoise and minimizes spray, thus increasing acceleration and top speed.
Superior Battery Charging
There's always plenty of electric power with Honda's exclusive neodymium magnet flywheel. At 35 amps, it provides high output and keeps battery banks charged all day, even when running multiple accessories.
3 Position Tiller Handle
The 3 Position Tiller Handle adjusts to your comfort for easiest hull maneuverability.
Torsion Dampener
Sometimes called a flywheel, it is located near the base of the powerhead. This design lowers the center of gravity for improved handling.
Engine Alert System
The Engine Alert System uses visual, audio and RPM reduction circuits to alert the operator of over-heating, low oil PSI and over-revving, preventing engine damage.
Corrosion Protection System
The Corrosion Protection System is a patented "Double Sealed" multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
Easy Maintenance
An easy "screw-type" valve adjuster system requires no shims and reduces maintenance costs. Front-mounted oil filter and oil filler make for easy maintenance.
Top Mounted Electronics
The alternators, ignition and other critical electrical components are mounted near the top of the powerhead to stay cool and dry. BENEFIT: Dependability
Sealed Starter
The starter motor is inverted into a sealed chamber that protects the starter bendix drive from the elements.
Honda's new 75hp raises the bar as to what boaters can expect of mid-size engines. More power from initial blast to top end speed, with lighter weight and more fuel economy than has ever been achieved.

(619) 384-2733 / Fax: (619) 649-4300
3302 Kurtz Street, where I-5 and I-8 meet, San Diego, CA 92110